<p>Antminer S9 13Th/s  Specifications:</p> <p>1. Hash Rate: 13TH/s ±5%</p> <p>2. Power Consumption: 1300W + 12% (at the wall, with APW3 ,93% efficiency, 25C ambient temp)</p> <p>3. Power Efficiency: 0.1 J/GH + 12%(at the wall, with APW3 93% efficiency, 25°C ambient temp)</p> <p>4. Rated Voltage: 11.60 ~13.00V</p> <p>5. Chip quantity per unit: 189x BM1387</p> <p>6. Dimensions: 350mm(L)*135mm(W)*158mm(H)</p> <p>7. Cooling: 2 x 12038 fan</p> <p>8. Operating Temperature: 0 °C to 40 °C</p> <p>9. Network Connection: Ethernet </p> <p> </p> <p> </p> <p>Shipping list:</p> <p> </p> <p>Antminer S9 Miner 13 TH/s ±5% ( New . NO PSU ) X 1 piece</p> <p>Notes:</p> <p>1.   Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.</p> <p>2.   Power supply unit is not included. You will need an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!</p> <p>Bitmain recommends the APW3-12-1600-B2 power supply for both the S9 and S7 miner. One such PSU cannot power more than one miner. 1600w PSU PSU Link</p> <p>3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 10x PCIE connectors connected to power supply. </p>

<p>7000RPM Cooling Fan Replacement 4-pin Connector For Antminer Bitmain S7 S9</p> <p>Feature:</p> <p>Connector: 4-wire original server dual connector</p> <p>Size: 120 * 120 * 38mm</p> <p>Voltage: DC 12V</p> <p>Current: 5.0A</p> <p>Speed: 7000RPM</p> <p>Air volume: 310,38CFM</p> <p>Wind pressure: 30mmH2O</p> <p>Noise: 64dB-A</p> <p>Bearings: High precision double ball bearings</p> <p>Fan frame: injection molding, PBT + 30% glass fiber + VO flame retardant</p> <p>Blade: injection molding, PBT + 30% glass fiber + VO flame retardant.</p> <p>Fan rotation: viewed from the fan blade counterclockwise</p> <p>Operating temperature: -10 degrees Celsius to +70 degrees Celsius</p> <p>Storage temperature: -40 degrees Celsius to +70 degrees Celsius</p> <p>Power range: plus or minus 15% of rated power</p> <p>Insulation resistance: more than 500 megohms</p> <p>Withstand voltage: sink leakage current 0.5mA 500V / 1 minutes</p> <p>Working life: 80,000 hours when the ambient temperature is 25 degrees</p> <p>Scope of application: workstation cooling / server CPU cooling</p> <p>Cable Length: 25cm</p> <p>Fit For: For Antminer Bitmain S7 S9</p> <p>Package Included:</p> <p>1 x Cooling Fan</p> <p> </p>

<p>BITMAIN AntMiner APW3++-12-1600 PSU Series</p> <p> </p> <p>Output Power :1600W</p> <p>Brand Name : Antminer</p> <p>Model Number :APW3++-12-1600</p> <p>Output Voltage: DC Voltage 12.15V</p> <p>Output Current :133A</p> <p>Input Frequency Range :47-63Hz</p> <p>Output Interface :PCI-E (6 PIN) X 10</p> <p>Dimensions :220mm*108mm*62mm</p> <p>Weight :2.5kg</p>

<div class="row" style="margin-right:0px;margin-left:0px;color:#888888;font-family:'Microsoft YaHei';font-size:14px;line-height:20px;text-align:center;"> <div class="col-sm-12 pad-0" style="padding:0px;float:left;width:1140px;"> <div class="dtl-title"> <h4 style="font-family:inherit;font-weight:500;line-height:1.1;color:inherit;margin:0px;font-size:18px;padding:0px;height:33px;border-bottom-width:1px;border-bottom-style:solid;border-bottom-color:#529bd7;"><span style="float:left;height:32px;line-height:32px;padding:0px 15px;color:#ffffff;text-align:left;background:#529bd7;">Notes</span><i style="float:left;height:0px;width:0px;border-top-width:32px;border-style:solid solid none;border-top-color:transparent;border-left-width:32px;border-left-color:#529bd7;border-right-width:32px;border-right-color:transparent;"></i></h4> </div> <div class="dtl-des" style="margin:60px 25px;"> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">1. Specifications and other information of the Antminer V9 are as mentioned below.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">2. Because of the national lunar new year (aka Chinese New Year) break, <strong>we are unable to check USD wire transfer payments from 14 February to 24 February 2018.</strong> For any payments received within this period, we will be able to start checking and confirm order payments only after this period.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">3. The Minimum Order Quantity (MOQ) for this batch is 5 units and the maximum number of units in a single order cannot exceed 300. </span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">4. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address cannot be changed after the order has been submitted.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">5. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">6. The shipping for this batch will start on a first-order-first-ship basis on 1st March for orders that Bitmain has received full payment for. We advise you to research and prepare in advance for customs' clearance in your country to avoid delays or unexpected costs.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">7. You will need an ATX PSU with at least 10 six-pin PCIe connectors. There are 3 six-pin PCIe connectors on each hashing board and all three need to be connected to the PSU for the hashing board to operate. Do not connect more than one PSU to the same hashing board. Bitmain recommends the<a href="https://shop.bitmain.com/productDetail.htm?pid=00020171107201722598O4kMWe280658" style="color:#337ab7;text-decoration:none;background-color:transparent;"> </a><a href="https://shop.bitmain.com/productDetail.htm?pid=0002017112922571217282BgmYP0064D" style="color:#337ab7;text-decoration:none;background-color:transparent;">APW3++</a> to power the V9.</span></p> <table border="1" style="border-spacing:0px;border-collapse:collapse;border:1px solid #000000;font-family:inherit;font-size:inherit;font-style:inherit;font-variant:inherit;font-weight:inherit;height:500px;line-height:inherit;margin:0px;padding:0px;vertical-align:baseline;width:800px;background-color:transparent;"><tbody><tr><td colspan="3" style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;"><span style="font-size:16px;"><strong>Parameters of ANTMINER V9</strong></span></p> </td> </tr><tr><td style="padding:0px;text-align:left;vertical-align:middle;">No.</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Parameters</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Value</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">1</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Product model</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">V9</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">2</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Hash chip type</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">BM1580</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">3</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Total quantity of hash chips</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">135 PCS</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">4</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Total quantity of hash boards</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">3 PCS</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">5</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Total hash rate</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">4TH ±5%</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">6</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">DC voltage input</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">11.60~13.00 V</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">7</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">DC current input @12V DC</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">79.59 A +10%</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">8</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">DC Power @12V DC input</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">955 W +10%</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">9</td> <td style="padding:0px;vertical-align:middle;"> <p style="margin:0px 0px 10px;text-align:left;">220VAC Power @25℃ ,93%</p> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">conversion efficiency of APW3</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">1027 W +10%</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">10</td> <td style="padding:0px;vertical-align:middle;"> <p style="margin:0px 0px 10px;text-align:left;">220VAC Power efficiency @25℃,93% conversion efficiency of APW3</p> </td> <td style="padding:0px;vertical-align:middle;"> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:medium;"><span style="font-family:calibri;"> 253</span></span>mJ/MH+10%</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">11</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Weight（without package）</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;"><span style="font-size:medium;"><span style="font-family:calibri;"> 3.05</span></span> kg</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">12</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Operation temperature</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">0-40 ℃</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">13</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Storage temperature</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">-40-85 ℃</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">14</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Operation humidity</p> </td> <td style="padding:0px;vertical-align:middle;"> <p style="margin:0px 0px 10px;text-align:left;">5%RH-95%RH,</p> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">prevent condensation</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">15</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Noise</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">76 dB</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">16</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Networking connection mode</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Ethernet Cable</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;"><span style="font-size:medium;"><span style="font-family:calibri;">17</span></span></p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Power connection mode                  </p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">All three PCI-E ports are required to power the board. You can use one PSU to power multiple boards, but do not attempt to power one board with two PSUs.We suggest to prevent  the control board to be powered up before hash boards be powered up.</p> </td> </tr><tr><td style="padding:0px;vertical-align:middle;">18</td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">Size(Length*Width*Hight,without package)</p> </td> <td style="padding:0px;vertical-align:middle;"> <p dir="ltr" style="margin:0px 0px 10px;text-align:left;">301mm*123mm*155mm</p> </td> </tr></tbody></table></div> </div> </div> <div class="row" style="margin-right:0px;margin-left:0px;color:#888888;font-family:'Microsoft YaHei';font-size:14px;line-height:20px;text-align:center;"> <div class="col-sm-12 pad-0" style="padding:0px;float:left;width:1140px;"> <div class="dtl-title"> <h4 style="font-family:inherit;font-weight:500;line-height:1.1;color:inherit;margin:0px;font-size:18px;padding:0px;height:33px;border-bottom-width:1px;border-bottom-style:solid;border-bottom-color:#529bd7;"><span style="float:left;height:32px;line-height:32px;padding:0px 15px;color:#ffffff;text-align:left;background:#529bd7;">Payment</span><i style="float:left;height:0px;width:0px;border-top-width:32px;border-style:solid solid none;border-top-color:transparent;border-left-width:32px;border-left-color:#529bd7;border-right-width:32px;border-right-color:transparent;"></i></h4> </div> <div class="dtl-des" style="margin:60px 25px;"> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">1. BCH(Bitcoin Cash) and USD wire are accepted in this batch.</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">For BCH payment method ,please use the exact amount mentioned in your order and complete the payment within one hour. After one hour, the order will expire and your payment may not be detected by the system automatically. <span style="font-size:12pt;">Payment must be in </span>BCH<span style="font-size:12pt;">. We cannot accept payment in BTC. If you send BTC to the </span>BCH<span style="font-size:12pt;"> wallet the coins may be lost. <span style="font-size:12pt;">If the payment is submitted but the receipt is delayed, we will make your payment "Valid" manually.</span></span></span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;"><span style="font-size:12pt;"><span style="font-size:12pt;">For USD wire,please upload the bank proof of transfer within 3 days. If no proof of transfer is loaded, the order will be expired. </span></span></span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">2. Because of the national lunar new year (aka Chinese New Year) break, <strong>we are unable to check USD wire transfer payments from 14 February to 24 February 2018. </strong>For any payments received within this period, we will be able to start checking and confirm order payments only after this period</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">3. The shipping cost, custom charges and taxes (if any) are not included in the retail price shown above.</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">4. Please fill your desired quantity, shipping address and select your preferred shipping service while placing an order to learn the shipping cost to your shipping address.</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">5. Special Provision: After an order has been submitted, a request to cancel the order, refund any part of the ordered amount or change the ordered item(s) to different items(s) or different batch(es) will not be entertained by Bitmain. We advise you to make any purchase only after deliberation.</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">6. To get a fast response from our team for any order or sales related inquiries please </span><span style="text-decoration:underline;"><a href="http://support.bitmain.com/hc/en-us/requests/new" style="color:#337ab7;text-decoration:none;background-color:transparent;"><span style="font-size:12pt;">submit a request here</span></a></span><span style="font-size:12pt;">.</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">7. The unit price and total price of the products, the amount paid by you shall be all denominated in U.S. dollars, no matter what currency you uses to make payment . The exchange rate between U.S. dollars and cryptocurrency shall be adopted following the below rules:</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">• In the event that you pay for your placed Order which is valid and has not been fully paid yet, the exchange rate between U.S. dollars and cryptocurrency fixed in such placed Order shall be adopted;</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">• Otherwise, the real time exchange rate between U.S. dollars and cryptocurrency displayed on the Site upon payment shall be adopted.</span></p> <p style="margin:0px 0px 10px;text-align:justify;"><span style="font-size:12pt;">Please do not place your order with anyone or anybody claiming to be an official Bitmain representative over email or Skype. It can be a scam and your confirmed order may never be delivered in such cases. Bitmain is neither responsible for nor offers any kind of compensation in such cases.</span></p> </div> </div> </div> <div class="row" style="margin-right:0px;margin-left:0px;color:#888888;font-family:'Microsoft YaHei';font-size:14px;line-height:20px;text-align:center;"> <div class="col-sm-12 pad-0" style="padding:0px;float:left;width:1140px;"> <div class="dtl-title"> <h4 style="font-family:inherit;font-weight:500;line-height:1.1;color:inherit;margin:0px;font-size:18px;padding:0px;height:33px;border-bottom-width:1px;border-bottom-style:solid;border-bottom-color:#529bd7;"><span style="float:left;height:32px;line-height:32px;padding:0px 15px;color:#ffffff;text-align:left;background:#529bd7;">Warranty</span><i style="float:left;height:0px;width:0px;border-top-width:32px;border-style:solid solid none;border-top-color:transparent;border-left-width:32px;border-left-color:#529bd7;border-right-width:32px;border-right-color:transparent;"></i></h4> </div> <div class="dtl-des" style="margin:60px 25px;"> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">1. A 180-day warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer on Bitmain's website. Overclocking the miner will void the warranty immediately.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">2. The warranty only applies to the original purchaser who purchased the machine directly from Bitmain. Once the miner is resold warranty coverage becomes the responsibility of the re-seller.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">3. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Bitmain warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">4. The following events will void the warranty:</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">     a. Customer removes/replaces any components by himself without receiving permission from Bitmain first;</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">     b. Damage caused by poor power supply, lightning or voltage surges;</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">     c. Burnt parts on hash boards or chips;</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">     d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">5. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Bitmain's instructions.</span></p> <p style="margin:0px 0px 10px;text-align:left;"><span style="font-size:12pt;">6. Bitmain will cover shipping cost when shipping a replacement unit within the warranty period.</span></p> <p style="margin:0px 0px 10px;text-align:left;">7. Bitmain does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.</p> </div> </div> </div>

<p><br /></p>

<p>1. Specifications and other information of the Antminer S9j are as mentioned below.</p> <p>2. Please select the correct address for shipping before you submit your order because, for this batch, the shipping address and shipping method cannot be changed after the order has been submitted.</p> <p>3.The shipping for this batch will start on a first-paid-first-ship basis for orders that Bitmain has received full payment for. We advise you to research and prepare in advance for the customs' clearance in your country to avoid delays or unexpected costs.</p> <p>4.Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.</p> <p>5. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!</p> <p>6. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10x PCIE connectors are connected to power supply. </p> <p>7. To ensure the authenticity, high quality and full warranty coverage of products you purchase from us, we strongly suggest you to purchase through our official website (www.bitmain.com) only and we will only be responsible for products purchased through our official website. Please acknowledge that we do not have any authorized third party distributor and reseller in any region or country. We will not allow our products to be sold by individuals through phone call, email or any other method. It could be a scam if you place your order with anyone claiming to be an official Bitmain sales representative/distributor via email or Skype or on any other website other than our official website (www.bitmain.com). We do not have any obligation to provide you with any compensation or indemnification in case of scam caused by third parties. The terms and conditions of sales of our products on our official websites are the only binding version and we will not in any event match any preferential terms offered by any other unauthorized third party distributor and reseller.</p> <p>8. Please click here to refer to the all certificates of the products.Please research on your local custom requirements before purchasing from Bitmain. In the case of any custom delay or shipment return due to the lack of certification, Bitmain will not be held liable.</p>

<p><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">Model </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">AvalonMiner 921 </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">from </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">Canaan </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">mining </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">SHA-256 algorithm </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">with a maximum hashrate of </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">20Th/s </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">for a power consumption of </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">1700W.</b></p>

<p><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">Model </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">Ebit E9+ </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">from </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">Ebang </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">mining </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">SHA-256 algorithm</b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">with a maximum hashrate of </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">9Th/s </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">for a power consumption of </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">1300W.</b></p>

<p>3-pole breaker</p> <p>Three phase, or two lines and Neutral</p> <p>100 amp</p>

<p>Breker 2 Poles - Thermomagnetic</p> <p>Biphasic, or two lines</p> <p>10 amp</p> <div id="gtx-trans"> <div class="gtx-trans-icon"></div> </div>

<p><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">Model </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">Ebit E9+ </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">from </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">Ebang </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">mining </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">SHA-256 algorithm</b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">with a maximum hashrate of </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">9Th/s </b><span style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">for a power consumption of </span><b style="color:#222222;font-family:'Open Sans', 'Helvetica Neue', Helvetica, Arial, sans-serif;font-size:16.5px;">1300W.</b></p>

<p>AntMiner S9 14.0 TH/s  Specifications:</p> <p>1. Hash Rate: 13TH/s ±5%</p> <p>2. Power Consumption: 1372W + 12% (at the wall, with APW3 ,93% efficiency, 25C ambient temp)</p> <p>3. Power Efficiency: 0.1 J/GH + 12%(at the wall, with APW3 93% efficiency, 25°C ambient temp)</p> <p>4. Rated Voltage: 11.60 ~13.00V</p> <p>5. Chip quantity per unit: 189x BM1387</p> <p>6. Dimensions: 350mm(L)*135mm(W)*158mm(H)</p> <p>7. Cooling: 2 x 12038 fan</p> <p>8. Operating Temperature: 0 °C to 40 °C</p> <p>9. Network Connection: Ethernet </p> <p> </p> <p> </p> <p>Shipping list:</p> <p> </p> <p>AntMiner S9 14.0 TH/s ,1372  ±5% ( New . NO PSU ) X 1 piece</p> <p>Notes:</p> <p>1.   Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.</p> <p>2.   Power supply unit is not included. You will need an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!</p> <p>Bitmain recommends the APW3-12-1600-B2 power supply for both the S9 and S7 miner. One such PSU cannot power more than one miner. 1600w PSU PSU Link</p> <p>3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner after ALL the 10x PCIE connectors connected to power supply. </p> <div id="gtx-trans"> <div class="gtx-trans-icon"></div> </div>